Business

How to Fix Gaps in Laminate Flooring Barrie

Laminate Flooring Barrie

If you have recently installed laminate flooring in your home, you may be wondering how to fix gaps. While this is a relatively easy process, you need to be very careful to avoid damaging the floor. Misplaced planks can become very unsightly, and the resulting gap can look unappealing. Luckily, there are some simple solutions that you can try. In this article, we’ll walk you through the steps involved in repairing these kinds of gaps.

Laminate Flooring Barrie

Firstly, you will need high-quality wood glue to fix gaps in laminate flooring. When choosing the glue, make sure you select one that has better wood-to-wood bonding capabilities. Commonly used wood glues include Titebond III and Gorilla Glue. Another good option is High-Viscosity Epoxy Glue. While this may be an obvious choice, the adhesive pad can weaken over time.

If you’ve already installed the flooring and notice a gap, you can use wood glue to fix it. Glue has a high viscosity, so it won’t damage the floor or cause it to look even worse. Besides, gluing with wood glue will eliminate the gaps permanently, but it won’t make the floor look brand new. And as with any DIY project, it’s always best to hire a professional.

How to Fix Gaps in Laminate Flooring Barrie

When installing new laminate flooring, it’s very important to keep moisture levels at the right level. Too much moisture will cause adjoining planks to pull apart. Hot weather causes laminate planks to expand and contract. If the room temperature drops below 60 degrees, they will separate. Before installing the flooring, it’s recommended that the floors are acclimatized to the room’s temperature. Once acclimatized, they won’t stretch out as much as they once did, and can even cause gaps to appear.

The first step in repairing gaps in laminate flooring is to identify the cause. This may be caused by high humidity in the room. The moisture in the air can cause the planks to pull away from each other. This issue is usually the result of uneven sub-floor temperatures or improper installation. Depending on the cause, you may need to acclimatize the flooring to the room’s temperature.

Next, you can use a floor gap-fixer. Before you install your new laminate flooring, make sure the subfloor is level. Otherwise, the planks will not align properly. To correct this problem, you should remove the protective backing of the laminate flooring and use a wood-glue block. Ensure the floorboard is flat and that it’s positioned about 2.5cm (1 inch) away from the displaced plank.

Leave a Reply

Your email address will not be published. Required fields are marked *